LinBPQ32 Port config for NinoTNC

This is the configuration I have used to get the TARPN NinoTNC to connect to LinBPQ32 on a Raspberry Pi. You may find that the COMPORT for you device maybe different from what’s in the settings below.

Please note, this example may not work with your exact configuration so use with caution.

PORT
        PORTNUM=3
        ID=NinoTNC
        TYPE=ASYNC
        PROTOCOL=KISS
        FULLDUP=0
        COMPORT=/dev/ttyACM0
        SPEED=57600
        CHANNEL=A
        PERSIST=225
        SLOTTIME=20
        TXTAIL=1
        QUALITY=1
        MINQUAL=81
        MAXFRAME=1
        FRACK=6000
        RESPTIME=40
        RETRIES=20
        PACLEN=236
        UNPROTO=ID
        L3ONLY=0
        DIGIFLAG=0
        DIGIPORT=0
        USERS=1
        IGNOREUNLOCKEDROUTES=1
ENDPORT