I now run an permanent LoRa APRS digipeater from the M1NER QTH alongside with the standard 2m 144.800 APRS digipeater M1NER-1. The LoRa iGate/Digipeater is called M1NER-10. The 2 APRS digipeaters are using the same colinear antenna via a 2m/70cm duplexer.
These are the settings of the digipeater
- Hardware : Lilygo TTGO LoRa32 v2.1-1.6.1 with battery
- Firmware : LoRa_APRS_iGate v2.1.1 25 October 2024
- Station Name : M1NER-10
- Output Frequency: 439.9125 MHz
- Input Frequency: 439.9125 MHz
- Spreading Factor: SF12
- Bandwidth 125KHz
Logs of this digipeater are uploaded via syslog to this site – LoRa APRS iGate Logs & Analysis